Excluding selected servers from AVG Secure VPN connection

Locate your Gateway IP address

Your Gateway IP address is usually the IP address of your router/DSL-Modem, for example, the device that provides internet to your PC. To set up a VPN bypass route, you need to know the IP address of this device. To find your Gateway IP address:

1. Click the Windows Start icon and type cmd, then select Command Prompt from the search results.
2. In the Command Prompt window, type route print and press Enter.
3. In the IPv4 Route Table output you can find your Gateway IP address under Gateway Address (or Gateway). Take note of this number.

1. In the Apple menu bar, select Go ▸ Utilities, then open Terminal.
2. In the Terminal window, type netstat -r, and press Enter.
3. In the output you can find your Gateway IP address under Gateway. Take note of this number.

Locate the IP address of a website

To set up a VPN bypass route, you need to know the IP address of the website that you want to access. To find an IP address:

1. Click the Windows Start icon and type cmd, then select Command Prompt from the search results.
2. In the Command Prompt window, type ping followed by the URL of the website you want to set up the VPN bypass for. For example, to find the IP address of the website www.mycompany.com, type ping mycompany.com into the Command Prompt window and press Enter.
3. In the Command Prompt window you can now see the IP address of the website. Take note of this number.

1. In the Apple menu bar, select Go ▸ Utilities, then open Terminal.
2. Type ping -c 4 followed by the URL of the website you want to set up the VPN bypass for. For example, to find the IP address of the website www.mycompany.com, type ping -c 4 mycompany.com into the Terminal window and press Enter.
3. In the Terminal window you can now see the IP address of the website. Take note of this number.

Set up a VPN bypass route

You can access certain VPN restrictive websites or servers by manually setting up a VPN bypass route. You will need to know your Gateway IP address and the IP address of the website you want to bypass.

1. Click the Windows Start icon and type cmd. Select and right-click Command Prompt from the search results, then click Run as administrator.
2. In the Command Prompt window, type route -p -4 add followed by the IP address of the website, then your Gateway IP address. For example, route -p -4 add 77.234.42.85 192.168.88.2 where 77.234.42.85 is the IP address of the website you want to access and 192.168.88.2 is your Gateway IP address.
   If you want to set up a temporary bypass route, remove -p from the route string.
3. Press Enter to activate the routing.

1. In the Apple menu bar, select Go ▸ Utilities, then open Terminal.
2. Type sudo route -nv add followed by the IP address of the website and then your Gateway IP address. For example, sudo route -nv add 77.234.42.85 192.168.132.2 where 77.234.42.85 is the IP address of the website you want to access and 192.168.132.2 is your Gateway IP address.
3. Press Enter to execute the command.
4. Terminal prompts you for your password. Type your password and press Enter.

The bypass route is set up. You can now connect to your VPN again and you should be able to access the previously blocked website.

Troubleshooting

If the steps above do not work or your bypass route stops working, we recommend you contact the administrator of the website or server you are trying to access. It is possible that the website or server has more than one IP address. In this case you will need to repeat the steps above for each IP address.